Normal view

There are new articles available, click to refresh the page.
Yesterday — 13 September 2025Main stream

Wisconsin to receive $29.8M in federal aid for flood victims

12 September 2025 at 14:55
Vehicles are stalled in a flooded roadway with a median near an overpass.
Reading Time: 2 minutes

Wisconsin will receive nearly $30 million in federal disaster relief to aid victims of last month’s flooding.

President Donald Trump announced Thursday in a social media post that he had approved the state’s request to help Milwaukee and other parts of the state affected by floods. The total approved is $29.8 million.

The approval came one month after historic rainfall caused widespread flooding in southeastern Wisconsin and three weeks after officials from the Federal Emergency Management Agency were on the ground in Milwaukee to survey damage.

The storm left flooded streets and basements, downed trees and power outages in its wake. Some residents were left without basic services, and the flooding may have claimed the lives of some people who were homeless. 

State and federal officials found the floods caused more than $33 million in damages to private property in Milwaukee, Washington and Waukesha counties. The request by Gov. Tony Evers for a presidential disaster declaration also included a request to FEMA’s Public Assistance Program for Door, Grant, Milwaukee, Ozaukee, Washington and Waukesha counties. 

In a statement, Milwaukee Mayor Cavalier Johnson called the approval “a significant stride forward in this area’s recovery efforts.”

U.S. Rep. Gwen Moore, D-Milwaukee, spoke on the House floor Thursday to advocate for federal help for the city. In a statement, she said the funds “will help my constituents pick up the pieces, and I will keep fighting for the resources they need until they are made whole.”

U.S. Sen. Ron Johnson, R-Oshkosh, received the news of the declaration from Trump.

“Thank you to President Trump for continuing to deliver BIG TIME for Wisconsinites,” Johnson wrote on social media.

U.S. Sen. Tammy Baldwin, D-Madison, in a statement said she would “continue to closely monitor to make sure Wisconsin gets everything we need to be on the road to recovery and the whole-of-government recovery effort does right by all Wisconsinites.”

FEMA representatives are scheduled to return to Wisconsin this month to assess damage to public infrastructure. In addition to the damages to private property, initial reports collected by the state found more than $43 million in damage to public property across six counties.

This story was originally published by WPR.

Wisconsin to receive $29.8M in federal aid for flood victims is a post from Wisconsin Watch, a non-profit investigative news site covering Wisconsin since 2009. Please consider making a contribution to support our journalism.

Before yesterdayMain stream

Milwaukee Art Museum’s new director was previously targeted by Trump

3 September 2025 at 19:03

The former director of the Smithsonian National Portrait Gallery, who stepped down after President Donald Trump claimed to have fired her, will run the Milwaukee Art Museum.

The post Milwaukee Art Museum’s new director was previously targeted by Trump appeared first on WPR.

Antigo school’s first-in-the-nation training sawmill readies students for lumber industry

Man in hard hat holds a board above a machine.
Reading Time: 3 minutes

A newly opened commercial-scale sawmill in Antigo is the only training sawmill of its kind in the U.S. 

The sawmill at Northcentral Technical College’s Antigo campus will be a teaching tool for northern Wisconsin students and members of the lumber industry. It’s part of the school’s wood sciences program and was funded by about $4.5 million out of an $8 million state Workforce Innovation Grant to the University of Wisconsin-Stevens Point’s Wisconsin Forestry Center. That grant is meant to provide career training that will help address worker shortages in the lumber industry.

In late May, wood sciences program director Logan Wells, who has been an instructor there for five years, stood by a stack of recently sawn lumber from cherry wood — the first batch of cuts from the sawmill to have gone through the kiln-drying and finishing process. The boards are all eight feet long, but of different widths.

“We take whatever width the log will give us,” Wells said. 

Man in. red hard hat looks at computer screens.
Instructor Logan Wells uses a scanner at Northcentral Technical College’s Antigo sawmill to determine the best cuts to make lumber out of a basswood log. (Rob Mentzer / WPR)
Man holds a board in a wood shop.
Logan Wells shows glued wood pieces in Northcentral Technical College’s wood shop. (Rob Mentzer / WPR)

Scanners in the sawmill find knots and other imperfections inside the logs like woodpecker holes or bark pockets. Boards that are at least 83% “clean” are top-grade. The lowest-grade cuts will be used for pallet wood. Part of the art and science of milling is figuring out how to cut each log to yield the most high-quality lumber possible.

In addition to the eight students enrolled full time in the program for the fall, Wells leads certificate programs and continuing education courses for industry professionals looking to sharpen their skills or gain experience with new technology. About 100 students per year come through those programs.

Wisconsin’s forest industry employs about 58,000 people, according to the state Department of Natural Resources, and its forest products are worth more than $24 billion per year. In addition to building materials and pulpwood used for papermaking, notable Wisconsin-made wood products include white oak staves used for whiskey or wine barrels and high-grade maple for the hardwood basketball courts used by NBA teams and in the NCAA’s Final Four.

But the industry faces challenges, made worse by aging and declining populations in much of northern Wisconsin, where many of the state’s hardwood forests are located.

Wells, a Green County native who has worked in sawmills and as a forest products specialist for the Department of Natural Resources, said the industry is also in a time of technological advancement. Like other manufacturing industries, lumber companies are incorporating robotics and artificial intelligence. Advances in engineered wood have led to new uses for wood, such as the mass timber skyscrapers now going up in Milwaukee and elsewhere.

“It’s a very dynamic industry,” Wells said. “It’s been around a long time, and it’s gonna continue to be around.” 

Inside the 10,000-square-foot mill, most equipment is elevated. Logs move on conveyor belts through the process of being debarked, sawn into slabs and refined. 

From a cockpit with computer controls, Wells demonstrates how operators calculate cuts to the outside of the log until it resembles a massive railroad tie, then slice it into boards that are shaped and given square edges by other machines. 

Sawdust flies from a machine.
Sawdust flies as a board is milled at Northcentral Technical College’s Antigo sawmill. (Rob Mentzer / WPR)

Sawdust from the mill is collected and used for packaging material by a local potato farmer. Other byproducts are turned into wood chips used for landscaping at NTC.

Wells said giving students and industry professionals a chance to work on professional-grade tools will help the industry continue to adapt to fast-moving technological changes.

“We’re just scratching the surface with the new sawmill,” he said.

This story was originally published by WPR.

Antigo school’s first-in-the-nation training sawmill readies students for lumber industry is a post from Wisconsin Watch, a non-profit investigative news site covering Wisconsin since 2009. Please consider making a contribution to support our journalism.

❌
❌